Salt Water Package

Our salt water package is a thin build coating that will not hinder the performance of the firearm and is designed to go on the inside of the internal parts of a firearm where the firearm is subject to a corrosive environment such as salt water. IE: Interior of receiver, bolt assembly, slides, etc, Parts will vary for the salt water package depending on the type of firearm and some will require a gunsmith fee for total disassembly.

Browning Citori Benelli SBEII

The coating is highly resistant against rust, abrasion, chemical resistant, self lubricating and will not attract dirt or dust and a heat dissipation with a tolerance of a heat range that can withstand -300 to 750 degrees Fahrenheit.

The product holds a lubricity value which the firearm will require less oil to lubricate the parts. This coating can be applied to the interior of a firearm without the need of protection in a non corrosive environment.

Below are two examples of the salt water package: Benelli Super Black Eagle II and a Browning Citori

See Pricing Page for price lists.

http://www.camo-solutions.com/images/gallery/gallerymain_citoriou.jpg <p>Top view of the same Browning Citori showing the factory appearance look we give to the firearm. The Top Lever, Safety & Barrel Sector Switch is moly coated Matte Black.</p><p>Nice tight crisp colors to the camo and the checkering is completely filled in w/o ugly touch up or air brush marks.</p> <p>another view of the Browning Citori. The top of the rib on the barrels are completely filled in and printed crisp. No missed areas, void, or unsightly touch up marks. 3 coats of our dead flat clear applied and baked on @ a undisclosed time frame & temerature</p> <p>the rear stock (wood) of the Browning Citori O&U. Nice image with clean look. A righteous finish over all. product by & property of Camo Solutions</p> <p>The underneath of the Browning Citori. The trigger guard w/screws, cocking lever, cocking lifter, the take down lever, main receiver pin and forearm extension is coated with a KG Gun Kote Matte Black moly coating.  The checkering is full and complete, NO dot's unsightly touch up marks. Just a 100% filled complete camo job. product by & property of Camo Solutions</p> <p>Our Salt Water Package, a popular package we offer to the waterfowler who hunts in a corrosive waters. The parts include to the over & under's & most side by side's is: forearm extension, take down lever (both located on the front stock), trigger guard w/screws, cocking lever, cocking lifter, barrel lugs, pivot point on barrels, top lever, interior of the receiver, safety & barrel selector switch, main receiver pin. This coating is designed to be applied to interior of gun parts as well as exterior. This coating holds a lubricity value. It will NOT hinder the performance of opening or closing of the firearm or any moving mechanical parts. This coating is a military spec coating which meets all specifications.</p><p>Note the ejectors were removed from the barrel assembly prior of the camo & saltwater coating (their still not installed)</p>
http://www.camo-solutions.com/images/gallery/gallerymain_benellisbeii.jpg <p>same Benelli SBE II, with our saltwater package. </p><p>The salt water package varies from one firearm to another. This specific firearms saltwater package include the following: the interior of the upper barrel assembly, ejector in the barrel assembly (done separate), the complete bolt body itself & charging handle, the bolt reslease button. These parts were finished in a black moly coating that is designed to be use on the internals parts (moving & stationary) of firearms. This coating has a thin built with a high lubricity value to prevent friction that add's to the performance of the firearm in cycling. This coating also holds great reistance to friction & dissipates heat.  This coating also will NOT attract dust & is a rust resistant coating. This makes for the perfect weatherized system for a firearm.</p> <p>same Benelli SBE II, with our saltwater package. </p><p>The salt water package varies from one firearm to another. This specific firearms saltwater package include the following: the interior of the upper barrel assembly, ejector in the barrel assembly (done separate), the complete bolt body itself & charging handle, the bolt reslease button. These parts were finished in a black moly coating that is designed to be use on the internals parts (moving & stationary) of firearms. This coating has a thin built with a high lubricity value to prevent friction that add's to the performance of the firearm in cycling. This coating also holds great reistance to friction & dissipates heat.  This coating also will NOT attract dust & is a rust resistant coating. This makes for the perfect weatherized system for a firearm.</p> <p> customers Benelli SBE II we re-finished in split colors, solid color moly & camo finish. The metal was re-finished in a KG Gun Kote baked-on moly Dark Earth Tan color. All the metal was media blasted to remove the original factory black finish. This particular firearm has our saltwater package.  </p> <p> This coating has a thin built with a high lubricity value to prevent friction that add's to the performance of the firearm in cycling. </p> <p> This coating also will NOT attract dust & is a rust resistant coating. </p> <p> The bolt assembly & the bolt release button were re-finished in Matte Black moly coating that is baked-on. </p> <p>same Benelli SBE II. The forearm and the upper barrel assembly. The forearm & rear stock was re-finished in the hydro printing Mossy Oak Duckblind.</p>